MAGNET BASE OPTION FOR LIGHT DUTY FLEX ARMS
· Any light duty flex arm with a 1/8NPSM male thread can be fastened to this magnet to create a magnetic base flex arm.
· Included with the magnet is a direct mount base with a 1/8NPSM female thread in the top. After mounting the base to the flex arm, the base attaches to the c-clamp with two ¼-20 x 3/8” socket cap screws (also included). The direct mount base provides a space at the bottom for any wiring to exit, if needed.
· approximately 100 pounds pull on thick steel surfaces
· magnet is approximately 3 inches in diameter